LONGFAVOR is a ceramic tiles supplier, specialized in ceramic tile flooring, wooden texture tiles with over 10 years of exporting experience.

ShIP to

Take a look at how deep your misunderstanding of tiles is

by:LONGFAVOR     2021-09-25
Tile is a decoration material that needs to be used for both outdoor and indoor decoration. Many people like it but are afraid of it. I like the decoration effect that it shapes to be really good-looking, and I am afraid that it is really troublesome to choose a good product, and some people still have many misunderstandings about choosing ceramic tiles. For example: polished tiles are non-slip, the thicker the tiles, the better, the larger the size of the floor tiles, the better, and so on. 1. Polished tiles are not slip resistant. The surface layer of polished tiles may have very high flatness and gloss. Many people will think that its anti-slip performance is very poor. This is a wrong way to understand polished tiles. In fact, the non-slip performance of polished tiles is very good. The more water there is, the more astringent the feet will be. This is because the upper and the tile surface are very flat, and the moisture on the tiles can make the two close contact. When it comes to an effective anti-slip effect, for example, after adding water between the two pieces of glass, it is very difficult to separate them, so polished tiles can also be applied to kitchen and bathroom spaces. MG8058PA-Full polished glaze-800*800 2. The thicker the ceramic tile, the better. As for the thickness of ceramic tile, there is no unified standard in the country so far. It is generally determined by the manufacturer, so the thickness and thinness cannot be regarded as identification. The standard for the quality of ceramic tiles. Although there is no standard for the thickness of ceramic tiles in international standards, there are standards in terms of water absorption, damaged strength, and modulus of rupture. The quality of ceramic tiles depends on the internal quality and density of the ceramic tiles. The higher the quality, the better the quality. For this reason, the quality of the tiles can be identified from the weight of the tiles. The heavier the tiles of the same specification, the better. From the perspective of low carbon and environmental protection, thin tiles will be the future tiles. The development direction of the industry. 3. The size of floor tiles The larger the tiles, the better. Nowadays, there are many tiles in the market, ranging from 150*150mm to 800*2600mm. Large bricks look great when they are laid, but the bigger the better, the choice of ceramic tiles should consider various factors, such as: the size of the real space, the building modulus of the space, the difficulty of construction, the price and the decoration Effect. Generally speaking, the living room area of u200bu200ba home is relatively large. It is advisable to choose floor tiles 800/1000/600 (mm). The wet areas such as kitchen masters, balconies, and bathrooms are relatively small, and the problem of ground water drainage must be considered. It is not easy to construct, so usually choose floor tiles with tiles below 600mm. The size of the tile is the larger the tile, the thicker it is, and the higher the price. MG8019PA-Full glazed glazed-800*800 4. Seamless tiles are 'seamless bricks' that are pasted without seams. In the industry, they usually refer to glazed tiles with fine edging, antique tiles and fully glazed tiles (four on the surface of the brick). The edges are not chamfered and are at right angles). Considering the small gaps between the tiles, they are called seamless tiles. Many customers like seamless paving. It is true that the smaller the gap, the better the overall decoration effect. However, in the actual paving process, it is difficult to do it. The main reasons are: 1. Consider the presence of tiles. There are no deviations in length, straight angle, edge straightness, etc., there is no ceramic tile without error; 2. There will be certain errors in the construction process; 3. Any product will expand and contract with heat, and ceramic tiles are no exception. . If the gap is too small, it will reduce the strain capacity of the tiles to the environment. Considering the change of the ambient temperature, the tiles will squeeze each other, resulting in the size of the gap should generally be about 1-1.5mm. Special effects can also widen the gap appropriately. 5. Matte glazed tiles are difficult to clean. In fact, the surface glaze layers of matte glaze and bright glaze tiles are fired at a high temperature and become the hard substance of the glass body, which can make the surface of the tile compact, and the water absorption rate is zero. It is airtight, non-absorbent, non-bleed, and easy to clean. MG8005PA-Diamond-800*800 has many styles of ceramics. As a ceramic tile manufacturer with 15 years of enterprise ceramic tile production and management. We have been continuously launching new ceramic tiles, with reliable quality, fair prices and high-quality services, so it is not surprising to get orders for large and small projects and home improvement from all over the world~! For fifteen years, we have been following the continuous progress of fashion, introducing a variety of new styles for everyone. Welcome to the hotline:
The importance of ceramic flooring has increased as marble wall tiles have become a must in our daily life.
To learn more about wall and floor tiles, give us a call at Foshan Longways Building Materials Co.,Ltd or visit us online by going to LONGFAVOR Tiles.
The value you get from watching how Foshan Longways Building Materials Co.,Ltd operates and runs our company and the potential mentorship you would get from us will go a long way towards helping customers understand our company.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...