In the process of old house renovation, demolition of
ceramic tile is one of the essential steps, how about the details of split tiles?
Let below small make up to arrange for you some information about split tile, hope can help to you.
1, large ceramic tile fall reasons for
basic level processing problem: basic level processing metope ground water is not clean, moist degree of inadequate, ceramic tile on the back of the dust, in addition to, not too much water will cause before the shop is stuck with metope ceramic tile adhesive is not tight, using loose after a period of time will appear fall off.
ceramic tile quality problem: one reason why the quality of ceramic tile influence loose, the water absorption of ceramic tile directly affect the degree of solid paste.
The provisions of the state, the bibulous rate of porcelain tiles is E≤
0.
The contraction of 5%, porcelain tiles inflation rate of about 4 ~ 10 -
6, when the ceramic tile is bibulous rate or cement wasn't up to standard, after heat bilges cold shrink, the ceramic tile with the cement shrinkage caused separation fall off.
ceramic tile drop solution to a big bottom
construction technology problem: if the cushion layer in the process of construction of cement mortar laid is too thick or cement water too much, will let the shop sticks ceramic tile is falling;
In addition, if it is a large size ceramic tile, if the seam is too small, heat bilges cold shrink after extrusion, each other cause case become warped and rupture.
: daily use of the thought in the ceramic tile is bibulous rate is low, if with cement in the ceramic tile not fully fit, under the impact of the larger, such as trampling or hard object impact, easy to cause separation of tiles and cement, brick bottom appear empty drum.
2. See to find the solution following instead
edges empty drum, if found that empty drum ceramic tile edge in after the shop is stuck, can be carried out on the local part of the empty drum water treatment, avoid the overall change.
ceramic tile drop solution to a big bottom
partial empty drum: wall ground tile appear a few local empty drum, such as in does not affect ambry, lens ark, showers and water heater installation conditions, can not be processed, but if affect installation and daily life, recommends that the ceramic tile of the local knock off the shop is stuck again.
large empty drum: if meet two-thirds of space appear empty drum ceramic tile, suggested that all come down to the shop is stuck.
3, problem solving, attention
repair point: if there are any shop sticks ceramic tile for a longer time appear empty drum, in the middle of the demolition can from brick openings, then slowly around crack pry up, in order to avoid damage to the ceramic tile around the.
ceramic tile drop solution to a big bottom
large size shop sticks ceramic tile: meet big norms product in the process of construction, model needs to be done before the shop is stuck piece, bond strength test, to prevent the blind construction of big empty drum or falls off phenomenon.
avoid early strength cement: if you choose in summer and autumn to decorate, should avoid to use early strength cement (
Concrete compressive strength is higher, higher than the normal 10% ~ 24%)
, cement mixing kill, soon after the construction is very bad.
that's small make up to you of some information about the split tile, hope these data can help to you.
LONGFAVOR is the unique producer of porcelain tile manufacturers and related products.
Looking for someone to handle your wall and floor tiles marble subway tile needs? Check out LONGFAVOR Tiles today for more information.
If you are looking for best product, then here are some product like ceramic flooring, marble wall tiles and brick floor tile in various styles which will surely meet your demand. Visit LONGFAVOR Tiles to know more!
